HY-R20 highly efficient automatic through the casing machine guest operating video
Dongguan Hui Yue Technology automatically through the casing opportunity to use copper wire will Touchan in PIN foot and automatic loading and unloading of this time will be cut to length sleeve and copper head automatically put on stand casing, artificial in Pull boot foot copper copper wire hung his head had been wearing a sleeve, just hand in the cable at the same time positioning (this action takes less than 0.5 seconds) at the sleeve can be used directly. For transformers processing, for most wear bushing transformer production, with CNC easy to use, quick, quality assurance, greatly improve production efficiency and reduce the cost of feasibility. Today, Yang Hui smaller pictures section specifically for everyone at our customer's site in the operation of the video, then let us look at the following automatic through the casing machine parameters and characteristics:
Automatic wear bushing machine - parameters:
Machine Model HY-R20
Operating voltage 220V 50HZ
Pressure requirements 0.5MPa
In line with diameter 0.1-0.8, equivalent products. Choose to wear the sleeve:
Working Principles casing diameter ≧ strands of diameter + 0.12mm
1-5 shares less the number of jobs
Machine size 250 * 110 * 130mm
Weight 8.8KG
Automatic wear bushing machine - Features:
1. Microcomputer control, easy to operate.
2. LCD touch screen Chinese interface.
3. casing size adjustable in length, size precision.
4. copper adjustable, for most wear bushing transformer production.
5. CNC with easy to use, quick, quality assurance, and improve productivity.
Yue Hui Li Gong specifically reminded: If you buy some quality time off, but automatic through the casing machine manufacturers, because the line is very thick, and very large, it will send the wire through the casing in the past, reel tape does not move, it will appears the line is not in place within a line and return line port, the feeding port where the tie, after a failure, and the need to wear bushing machine automatically re-commissioning and re-threading, which greatly affected the efficiency, Huawei recently under Dongguan Dazhong Electronics Division I signed the 100 HY-R20 automatically through the casing machines, please view http://www.cnhuiyue.com/case/case118.html