Discussion on the high frequency transformer using core assembly machine rubber covered requirements
HY-B08 based automatic core assembly machine of HY-B06 automatic taping machine is added on the automatic feeding mechanism vibration, instead of artificial feeding, a person can control multiple machines, greatly reduce the production cost, improve production efficiency; the yield is about 52-58 / min; below by Hui more Xiaobian with a discussion on the high frequency transformer using core assembly machine rubber covered requirements.
1, confirm the core without damage or deformation, assembly of magnetic core, magnetic cores of different materials can not be assembled in the same products, core and core contact surface should be clean, otherwise in the impregnated L values will then decrease after operation.
2, packet core provisions tape width, by physical appearance as a priority focus, time to core width reducing tape wide gap of about 0.3mm ~ 0.7mm is the best. The whole process of note: core tape up around the place and at the end, vertical play around in the foot end of the central, ends in the central.
Details about the core assembly machine welcome to our Dongguan Hui Yue Technology consulting!