HY-B02 automatic taping machine precision configuration introduction
Division I Huiyue technology of automatic encapsulation machine is suitable for any vertical, horizontal transformer can be encapsulated, and the replacement of species is simple, rapid, suitable for a variety of operations. Below by Hui more Xiaobian to introduce the HY-B02 automatic taping machine precision configuration
1, the shift gear motor adjustable speed (limited), cut cut and paste with motor adjustable speed; wind motor coil pay speed adjustable.
2, wind motor coil number can be set, the other motor each work cycle laps for a ring.
3, production reached a set production value down to wait for the next action (reset), wait to input parameter setting.
4, cut the belt after a motor is stopped between the gear motor running delay adjustable settings, set to 0 automatically when you enter the point. Start / stop button on the cyclic delay is 0, point move finished 1 duty cycle.
5, the manual key setting: in the standby mode, 3 per motor point move around, often by often go. By 3 key corresponding to the 3 motor.
Automatically find the origin 6, power on, the order was: reel -- gear -- cutting, work cycle is completed pre initialized.
7, start / stop button keys for the same signal switch, press the stop button operation state, the machine or complete cycle back to stop.
8, if the protection switch, in any state are immediately stop running (pause), cancel after the state protection by operating conditions at the time of the next to continue working, automatic taping machine until the completion of the preset work output.
More details on the HY-B02 phase automatic taping machine. Welcome to our Dongguan Hui Yue Technology consulting!