Hui more detailed automatic casing machine main factors of failure
Our Dongguan Hui technology more automatic casing machine is used with CNC is convenient, quick, ensure the quality, improve the production efficiency; casing length can be set arbitrarily, the end can choose; the automatic casing machine can be divided into two tube feeding.
Blocking the Teflon casing failure
1, tube feeding needle selection is too large, check and choose the right to guide pin
2, double pressure preload gap is too small or too large, check and debug the preloading slot (Teflon casing from side out)
3, double block closed open is not flexible, the square shaft injection WD-40 antirust oil, and clean the dust blowing gun
Blocking the line fault
1, wire feeding guide needle selection is too large, check the wire guide pin is reasonable, and the replacement of a model of the nozzle.
2, wire feeding guide needle selection is too small (copper wire to increase by) a model
3, wire feeding wheel wear, replace the new wheels, tension and small L arm
4, Teflon casing incision is not round, to replace the pipe cutting blade
5, wire feeding guide needle and double block distance is too large (two of the distance is 0.1mm, please use our confirmation to the feeler gauge distance)
Other fault
1, the vibration of the motor is not running: check the data link or directly replace the control box.
2, from the line to line mouth: extension wire length, wire feeding wheel wear, replace the new wheels. Clip line into the line to check the action is slow, if slow replacement control solenoid valve clip line into the line.
3, the muffler noise during the operation, check valve, replace the cutter cylinder
4, other local leak, check the stainless steel joint is loose or replace the stainless steel joint
Hui more automatic casing machine physical map:
