HY-R20 automatic casing machine and maintenance matters
Our HY-R20 automatic casing machine for 14L~30L Teflon tube, casing size length can be adjusted, the precise size; copper adjustable, suitable for the vast majority of wear bushing transformer production. With all the talk about automatic casing machine and maintenance matters.
1, daily use, board, a month to clean up the host cell, the gap around the drop tube thread equilateral angle waste, clear direction from left to right, tube feeding part (from back to front, the use of dust blowing gun)
2, slide surface, V type slot position must be kept clean and free of debris, dirt accumulation.
3, electrical switch can be used wet rag scrub, prohibit the use of the environment around the water, to prevent water caused by the reasons of safety accident
Dust, clean up 4 monthly rotating parts of host, accumulation of waste and other impurities, to ensure the normal operation of the mechanical transmission system, smooth
5, monthly check switch site link is strong.
6, can not arbitrarily adjust the control electric box software, can not change all wire links and position, or because of the losses caused by the company does not assume any responsibility.
HY-R20 automatic casing machine physical map:
