What are the requirements for the use of automatic solder solder machine?
Our HY-H02 flip type solder machine is a variety of simulation of human movement curve, and 360 degrees set the flip angle function, can weld PIN and TYPE SMT all kinds of vertical horizontal and other products. What are the requirements for the use of automatic solder solder machine?
One, solder machine requirements:
1, tin furnace temperature at 400 DEG ~450 deg.
2, the concentration of flux 1:1 (adjusted according to customer requirements).
3, Pin needle flux dip (Shao Liang).
4 feet, inclined inserted depth to tin tin tin, pin needle bottom, stay out of 1~2s.
Two, solder note
1, the solder shall be uniform and smooth, no leakage, cold welding, welding joint welding, oxygen welding or tin group.
2, solder tin surface to remain clean, can not have debris. Lest debris stained pin needle cause adverse.
3, the end of the solder do not come up too fast, lest cause too much solder.
4, side welding produced when the tin tip do not affect the appearance, the best tin tip does not exist.
5, good control of flux concentration ratio, otherwise it will affect the quality of the soldering tin.
6, solder can not let tin surface encounter copper, copper and can not have tin slag skeleton.