Dongguan infrared tunnel oven operation video
Our Dongguan Hui Yue technology infrared tunnel furnace for high frequency, low frequency, transformer and hardware plastic products baking. The following is a brief introduction of the main structure and operation of the Dongguan science and technology infrared tunnel oven by the wisdom of the S.
Infrared tunnel oven parameters:
1, exterior size: L6000W900H1250mm. (size can be customized)
2, baking area size: L4800mm*W700mm*H150mm. Material placed in front of the 600mm, after the 600mm, discharge area and the material area with stainless steel plate. The inlet outlet is highly regulated, and the adjustment range is 30-100MM.
3, import and export of SUS201=1.5MM protection board.
Number 4: 2, the body is divided into 3 sections. Section a baking zone, 250MM low temperature zone, 2 temperature zone.
5, the furnace body adopts 1.5MM/1.2MM galvanized plate bending welding outside the upper part of the oblique angle.
6, the furnace body wall for SUS201 1.2MM stainless steel, each of the infrared lamp tube with stainless steel reflector.
7, power: 1/2P Taiwan East yuan inverter and 1/2P motor.
8, transmission speed 0.2~3M/min (frequency conversion adjustment)
9, conveying carrier: transmission bandwidth 700MM 30*15 stainless steel flat, spacing 46MM. On both sides of 6 double pitch high carbon chain.
The following is the Division I Dongguan Hui Yue technology infrared tunnel oven operation video, the video only provides viewing, declined reproduced!!!