The basic requirements for core assembly machine loaded cores
Our core Hui Yue Technology core assembly machine is fully automatic assembly machine, greatly reduce production costs, the core assembly machine is a programmable logic controller (PLC) and the 7.1-inch touch screen parameter setting and command input. Below we explain the basic requirements with loaded core.
1. Place the finished packaging tin solder wire core, the core outsourcing 3 laps taping process called assembly.
2. If the core air gap is opened, there should be an air gap on the core pin at; gap core requires the pad to be the use of a suitable material, material thickness, the inductance in order to achieve its stability;
3. Use craft materials regulations, models of the core, the same kind of size models of the core of their very different material, unavailable mixed. If significant core damage can not be used.
4. Outsourcing core and the core width matching tape should not be too broad or too narrow, the core side of the tape from the beginning, followed by the requirements of welding copper to be in the middle of the starting side of the cut on the side of the cuff, without welding Copperbelt in the bottom right angles shut core cut. Tape should be wound neatly overlap between the layers together should not cross dislocation; and to be wound tight, not loose.
5. The assembly line package skeleton found damaged, you should stop using the line package 6. The assembly line package should be kept clean and free of dirt.
Hui Division I want more core assembly machine can further understanding, (about the Magnetic core Assemble machine)