Core assembly machine for taping the basic requirements of the core assembly
The more intelligent way to feed the core assembly machine technology: automatic feed; can be customized according to customers' products and non-standard automation equipment, fixture. Core assembly machine for assembling the core taping What are the requirements?
1, the core assembly, not a significant dislocation:
2, cores of different materials can not be assembled in the same product, added to the material of the pad material shall GAP temperature 130 ℃, core composite surface to be absolutely clean, otherwise after impregnated easily lead "L" value decreased;
3, prior to assembly to confirm whether the apparent core damage, deformation;
4, as required by SPEC, press requires the job, if not it will require GAP core group assembled at the beginning of the winding side (horizontal BOBBIN), PIN side (vertical BOBBIN);
5, 2-3 layers of tape wound core with a fixed, flat tapes, compact, tape starting at PIN side (vertical), the primary side (horizontal) and ends at PIN side (vertical), the primary side (Horizontal ) around the corner, the physical appearance of the tape width is less than the core width 0.3-0.5mm or better;
(about the Magnetic core Assemble machine)
