The advantages of the more automatic casing machine
The advantages of the more automatic casing machine
The more intelligent the 0.8-1.7mm or 0.1-1.0mm, the number of 1-60 shares and the product of the following products. For 18L~30L 19L-14L, Teflon casing. The advantage of technology below by small Hui with you more detailed about automatic wear of casing machine.
1. Current around the line stations commonly used method: by a winding line station personnel will be pre cut into a specified length of the casing from the container manually disjunctive, wire center alignment casing center, then the copper wire through the sleeve, then copper thread wrapped in pin began with CNC winding machine winding; when the specified circle number and hand cut wire around, repeat such as before the hand wearing bushing technique; so transformer in each a need to wear the casing of the winding production.
2 to the above processing method, the staff because of the processing procedure is more, the production efficiency is low.
3 hand cut wire, employee fatigue strength, so the effect of working hours.
4 wear sleeve efficiency will be affected by the visual and empirical values of employees.
5 to spend more time per unit of work, the time required to wear a S 3-4, a winding to wear the casing to less time consuming 6 S time, a serious impact on production efficiency.