How to change the line diameter of the HY-R20 automatic casing machine
Our Dongguan Hui Yue technology automatic wear casing machine compatibility is from casing 14 to 30, casing, so the general purchasing our HY-R20 automatically put casing machine can be compatible with a variety of wire diameter, then to change the wire diameter when how should do? Below by the wisdom of the more small Li S with you.
1 after boot, shown installation wire rod and connecting rod according to the follow, installed a Teflon tube roll loading and winding wire.
2 line selection mouth: 0.05mm = nozzle specifications - diameter specifications 0.1mm
For example: the actual diameter of the 0.43mm line to select the 0.5mm line of the mouth as shown above
3 nozzle selection: Teflon tube latte to choose the most close to the nozzle. (note the front of the front of the tube for the front of the tube.
Teflon tube choice: according to the selected line to determine the specifications of Teflon tube mouth
0.05 to 0.2mm: minimum Teflon tube nozzle specifications
For example: 0.5 of the line mouth, then the choice of the tube can choose the 24L tube (the limit of the smallest) 23L pipe (just right) 22L (relatively large)
4. Please select proper nozzle and outlet mouth carry on reasonable choice according to the specification of the Teflon tube, below is Teflon tube specification table
