Core automatic assembly machine for plastic bag core assembly requirements
Automatic assembly machine core encapsulated core automatic feeding, skeleton automatic feeding, automatic assembly and automatic plastic bag, plastic bag core automatic assembly machine What are the requirements for core assembly it? Hui Xiao Bian by the following Detailed look with you. (about the Magnetic core Assemble machine)
1, CORE sure: not damaged or deformed.
2, requiring the drawing of CORE GAP, after grinding to be reassembled.
3, the assembly: If no special provisions, horizontal model has been installed on the primary side grind core, vertical model has been milled PIN terminals.
4, the core fixation can iron clamp (CLIP) or tape (MYL) fixed the (TAPE 2T <** 28 <TAPE 3T), and the junction point in the core EPOXY glue fixed shall be dried and a half after dispensing hours and then placed in 120 ℃ oven bake one hour tape to be fixed packet core of the package using the same line of color tape (except for the special requirements of the drawing), the manufacturers must meet UL specifications NOTE:.. core tape from around the place and at the end; vertical play around in the PIN end of the central and ends at the center; horizontal play around in PIN1, ending in PIN 1. plus COPPER from around the welding points, ends at the welding point.